How to Reset The Combination on a Dial Lock

If you have forgotten the combination of a dial lock or want to reset the combination, you can easily do so with basic household items. You can reset the combination on a dial lock without looking it up, without seeking help from a locksmith, and without having to buy a new lock. In this article, we’ll show you exactly how it’s done.

Materials You Will Need

• • A dial lock

 

• • A thin metal shim

 

• • A paperclip

 

• • A pair of needle-nose pliers

 

Step 1: Preparing the Lock

To start off, open the dial lock by turning the dial from left to right. Once the dial is on the correct combination, the lock will open. Now, turn the dial counterclockwise until it clicks into the “reset” position. This position should be clearly marked on the lock’s body.

Step 2: Insert the Shim

Now, take the thin metal shim and insert it in between the dial and the body of the lock. It should fit snugly in place. Push it in until you hear a click, which indicates that the shim is properly inserted. The shim should now be firmly in place between the dial and the lock.

Step 3: Reset the Combination

Now that the shim is in place, you can reset the combination. Take the paperclip and bend it to create a small hook at one end. Insert the hooked end of the paper clip into the hole on the dial and rotate it until you hear three clicks. Move the hook to the next hole and repeat the process until you’ve completed all four holes.

Step 4: Remove the Shim

Once you’ve reset the combination, you can remove the shim. Take the needle-nose pliers and grasp the shim’s end. Carefully pull the shim out in one swift motion. Check the lock to make sure that it’s working properly and then store the shim away in a safe place.

Conclusion

You now know how to reset the combination on a dial lock. In case you need proffesional assistance, we are here for you. Call now for Proffesional locksmith  Marietta ga